PMXBT30000

Promax Water Tank 30000L

Choose quality and style with our range of large corrugated tanks, designed for superior performance and peace of mind.

These ultra strong tanks are engineered to last and compliment every landscape with their contemporary look.

Promax tanks are so strong they are the only plastic water tanks in NZ that can be buried up to 1 metre in the ground and still retain a 20 year warranty!

  • Bury up to 1 metre in the ground - can help to overcome height restrictions
  • Free delivery to your property
  • Corrugated side walls for extra strength
  • One piece construction - reducing maintenance and costs
  • 4 inlet panels for ease of installation
  • 2 x 50mm threaded base outlets
  • Clean, fresh untainted storage for drinking and household use
  • Range of 7 Colours to suit your surroundings
  • 20 year warranty
  • Certification to AS/NZ 4766 - Polyethylene storage tank standard

$4,544.00 (incl. GST)

Code Description Capacity(L) Diameter(mm) Height(mm) Weight(kg) Manhole Dia(mm) Outlets(mm)
PMXBT30000 Promax Water Tank 30000L
30000 3660 3100 433.5 600 2x50
 

 

All aboveground tanks over 10000L - 30000L are delivered Nationwide on our fleet of purpose-built trucks.

  • The clearance required for our truck and trailer is 21 metres long, 5 metres high and 3.5 metres wide.
  • The truck only (without the trailer) is 11 metres, 5 metres high and 3.5 metres wide.

No, you cannot use your tank in place of a retaining wall. Uneven pressure on your tank  has the potential to deform and damage the tank.

However, you can recess your tank into a bank, provided there is a clear space between the two.

Yes, this is possible with the 25 and 50mm corrugated tank fittings. Extra charges may apply. Find out more about Promax Corrugated Tank Fittings here.

The key difference between our Promax and Xpress Water Tanks is the Promax range has corrugated sides while the Xpress range has smooth sides. Other key features of each include but are not limited to:

  • The corrugated profile of the Promax range adds a lot of strength to the sidewall of the tank.
  • The Promax 10000, 25000 and 30000L tanks can be buried up to 1m into the ground, can be backfilled against if needed.
  • The Promax Tank comes with 2x  50mm outlets while the Xpress tanks comes with 1x 50mm outlet.
  • Promax Tanks are available in 7 colour options while the Xpress range is available in 2 colour options. Click here for our colour chart.
  • Both the Xpress and Promax range have the same warranty.

Each project will have varying requirements so if you are unsure what you require, please get in touch with our friendly team.

Click here for video demonstration of the strength between these tanks.

No, there is no plastic tainting or taste whatsoever.

All our tanks are manufactured from virgin plastic certified to AS/NZS 4020: 2002 Potable (Drinking) Water Standard & AS/NZS 2070: Part 1 and Part 8 Australian Standards for Food Contact.

With a full tank of water there is no noticeable temperature increase. However, in summer with only a small amount of water in your tank you can expect a minor increase in temperature.

To bed your tank you should use either:

  • Sand
  • Scoria
  • Gap 20 metal

Yes, you can bury our small Promax corrugated tanks (up to 5000L) up to a third of their total height.

There are 4 inlet/overflow panels located on the dome of your roof specifically designed for installing inlets/overflows on your big tank. These will take up to 100mm PVC pipe.

Yes, you can use the Promax balancing kit  to join tanks together.

This kit contains all the fittings required to install a 50mm water balance pipeline between two tanks, including an isolating ball valve.

You can shop our products right here on our website. Alternatively, our products are available to be purchased nationwide through most leading rural and plumbing merchants.

Our stockists include: 

Some hold a standard range in stock, others will order on request.

The Promax Tank Fitting kit contains all you need for fitting your Promax or Xpress Tank to your pump and water source.

Fitting kit contains:

  • 2 x Promax Pipe seals - 90mm
  • 1 x Reducing nipple 50mm - 25mm
  • 1 x Promax Plastic Ball Valve - 25mm
  • 2 x Promax Hose Couplings - 25mm
  • 1 x 2m Flexi suction delivery hose 25mm
  • 1 x Roll Thread Tape

We recommend you use a professional tank cleaning company to do this. A professional tank cleaning company is able to vacuum the base of your tank without emptying the water. Happy Tanks can clean your Tank if you are in the Auckland and Northland regions. We recommend a Google search to find a local cleaning company for your area. 

If you would like to clean the tank yourself, please see the links below for instructions on how best to do this.

Alternatively, you could consider installing a Tank Vac. These will remove build-up of sediment already present and help keep your tank clean all the time.

We offer a variety of colour selections. Browse our range of options to find one that will best compliment your surroundings. Click here to view our  Tank colour selections.

We recommend using a registered plumber or drainlayer to install your water tanks. Visit our recommended installers page to find one in your area. If you wish to install yourself, we recommend you follow the guidelines provided in the following resources: