Tank Installation Instructions

Your Promax Water Tank is guaranteed to the original purchaser for a period of 20 years against faulty workmanship provided installation is carried out in the correct method. Promax does not take any responsibility whatsoever for the preparation of tank sites or the installation of its products.

Correct tank site preparation, as well as preservation, is the sole responsibility of the purchaser. The recommended site preparation is as follows:

	Ensure that the tank site is flat and level, free from rocks or stones etc, or any other foreign matter that may damage the tank’s base
	Ensure that the tank site is well compacted, if fill is used to prepare or level site
	Ensure that the tank site is at least 300 mm larger in diameter than the tank
	Ensure a flexible hose is installed after gate valve and outlet at least 300 mm in length
	If a sand fill base is used, a retaining wall must be provided to prevent sand from washing away after installation, i.e. tank base must remain fully supported at all times
	Tie down and secure tank on delivery either by tying down with rope or putting at least 200 mm of water in the bottom
	Tank outlets must not be subjected to any extra force e.g. over tightened
	Overflow must be piped clear of base to avoid erosion
	The number of inlet pipes, their sizes and capacities must equal the number of overflow pipes, their sizes and capacities
	Do not allow tank site to deteriorate after installation due to any form of erosion or site destruction caused by vermin such as rabbits
	For your safety please use caution when working on domed lid

*Talk with the Promax team for more information on this feature